Obsolete:Air Brush Baffles
This page contains historical information. It may be outdated or unreliable.
2013Air Brush Baffle Test
Conducting a test based on RT 5640 to determine if the Rittal Air Brush Baffles make any significant changes with cooling in our Data Center Environment. The test is being conducted on Rack c6-eqiad.
- The temperature probes are pulled away from the rack so they are not touching any metal and are located 1/4 quarter down from the top and 1/4 up from the bottom.
- Sensor 1 is at the top of rack
- Sensor 2 is at the bottom of the rack
Conditions without the baffles installed
- Torrus
- Server Enviro
- Thermal Temperature Gun
Conditions with the baffles installed
- Torrus
- Server Enviro
- Thermal Temperature Gun